Setup consisting of Hairpin Coil Forming Machine HCM series mechanically connected to Hairpin Coil Insertion Machine ACM74 series for the processing of DC armatures using bare or enameled rectangular wire

The setup is designed especially according to the customer’s case of application. The process is completely automatic. One operator is required only for removing the finished armatures and loading new ones. Production rate for 25-slot armatures is of the order of 70-90 pcs/hour.

The parameters given below are aproximate and can be altered according the particular case of application.

No

Parameter

Value

1.

 Wire section thickness, maximum (mm) 3.0

2.

 Wire section thickness, minimum (mm) 1.1

3.

 Wire section width, maximum (mm) 6.0

4.

 Wire section width, minimum (mm) 3.0

5.

 Shoulder width, maximum (mm) 65

6.

 Angle between legs, maximum (º) 90

7.

 Cycle time per hairpin (s) 1.7…2.2

8.

 Capacity (pins per hour) 1600…2100

9.

 Motor power of the dereeler (kW) 0.12

10.

 Worm gear reduction ratio 1:40

11.

 Power supply on request

12.

 Air pressure supply, minimum (bar) 4

13.

 Air consumption (Nm3/h) 14

14.

 Weight (kg) 800
HCM 620.02 (ACM73) & ACAM 01 (ACM74) SETUP - bare or enameled wire

HCM 400E(ACM73.02) & ACAM02 (ACM74.01) SETUP - enameled wire

 

 

COMPANY | PRODUCTS | WHERE WE ARE | CONTACTS | Home

Webmaster