AUTOMATIC MACHINE FOR SIMULTANEOUS CLEANING OF OUTSIDE AND INSIDE DIAMETER OF CAR ALTERNATOR STATORS ASC 01(ACM57)

This is bench model semi-automatic machine with manual loading/unloading of the workpiece, intended to joint together the operations of removing old paint or impregnation varnish simultaneously form the surface of both inside and outside diameters of car alternator stators, mainly those with smooth outside daimeter surface. The outside surface is cleaned by means of steel wire circular brush rotating with axis parallel to the axis of the workpiece. For the inner diameter the classic sanding process is adopted, using a slotted rubber drum for the sanding band support.

Approximate capacity: 240 pcs/hr.

 

No

Parameter

Value

1 Workpiece  
Name Alternator Stator
Stator inner diameter, maximum, mm 130
Stator inner diameter, minimum, mm 80 (65 with Ø2" sanding band)
Stator outer diameter, maximum, mm 170
Stator outer diameter, minimum, mm 100
Stator width, maximum, mm 35
Operation I. D. Sanding & O.D. Buffing

2

Workpiece drive  
Type of motor MO71B/8D
Power, KW 0.12
Speed (by 50 Hz), RPM 670
Workpiece spindle speed (by 50 Hz), RPM 112
Driving belt

POLYFLEX JB
5M850, GATES

3 Sanding band spindle drive  
Type of motor MO80A/2D
Power, KW 0.75
Speed of rotation (by 50 Hz), RPM 2800
Spindle speed (by 50 Hz), RPM 4520
Speed of sanding band, m/s 18
Driving belt POLYFLEX JB
7M850, GATES
4 Wire wheel brush drive  
Type of motor MO90L/2D
Power, KW 2,2
Speed of rotation (by 50 Hz), RPM 2800
Spindle speed (by 50 Hz), RPM 2800
Speed of brush, m/s 30
Driving belt POLYFLEX JB
7M850, GATES
5 Sanding band dimensions  
Diameter, mm 76.2 (3")/50.8(2")
Width, mm 38,1 (1 1/2")
6 Wire wheel brush dimensions  
Diameter, mm 203.2 (8")
Width, mm 38.1 (1.5")
7 Power supply 3x220V, 60Hz
8 Air pressure supply, bar 6
9 Overall dimensions  
Length, mm 710
Width, mm 950
Hight, mm 660
10 Weight, kg 230

COMPANY | PRODUCTS | WHERE WE ARE | CONTACTS | Home

Webmaster