IMPREGNATION OVEN FOR STARTER ARMATURES AND ALTERNATOR ROTORS WITH CHAIN TRANSPORT ACM 30
Impregnation oven is designed to apply varnish coating to starter armatures and alternator rotors. The workpieces are transported by a carrying chain, based on the shaft end in changeable bushings. The impregnation oven is divided into 5 working zones:

1. Loading/unloading zone.

2. Workpiece preliminary heating zone.

3. Zone for immersing te workpiece in the varnish bath.

4. Zone for the drying of the varnish coating.

5. Zone for the cooling off.

The operation of ACM 30 takes approximately 88 minutes for the first workpiece to pass through the imregnation oven, the successive pieces will follow at rate of one unit every 24 seconds.

 

COMPANY | PRODUCTS | WHERE WE ARE | CONTACTS | Home

Webmaster